fabric
Fabric is a preconfigured network switch that was built to connect your vx and rx servers at the highest bandwidth so that each frame is delivered accurately.
Preconfigured for setup in minutes
Fabric is preconfigured so you can connect it with your rx range and vx servers in minutes - without the need for network engineering knowledge.
Scalable to any size of production
Connect your rx range and vx servers via 64 ports, and add additional fabric switches as your production grows.
Reliable performance
Built for powerful and robust performance, fabric streams 4k content without latency or dropped frames. The built in software is optimised to run RenderStream reliably.
24/7 global support
We’re here to support. With a three year warranty for your fabric switch, you can access 24 hour global support for any questions or issues with your product.
Powered by RenderStream
RenderStream runs powerfully through the fabric switch to connect the vx and rx range. By passing on parameters and tracking data, automatic latency management allows for pixel perfect delivery.
Cluster Rendering
Deliver high fidelity graphics safely by distributing rendering power across multiple render nodes.
Seamless synchronisation
Synchronise your physical stage with your virtual set via hardware, software, content engine and camera tracking
Unreal workflows
Immediately impact your productivity with dynamic control of the engine and automatic workflows on Unreal Engine, Notch and others.
Order today
Complete the form to learn more about fabric and how it works with your other disguise hardware. You will receive our latest software and hardware developments, insights and case studies on how our community are using this new technology to advance their production workflow.
Pre-configured ports
16 configurable 100G ports, capable of up to 64x 25G links
High bandwidth networking
Stream content at 4k over high bandwidth networking
IP video ready
fabric supports IP video
Configuration software
Access to software and software updates, ready to connect with RenderStream
Fully bundled
Small or medium bundles include cables, SFPs and rackmount
Technical specifications
| Hardware Specifications | Voltage | 100-240VAC, 50/60Hz |
| Power Consumption | Typical Power: 94.3W (Typical power with passive cables) Max power with optical cables: 248.6W (Assuming 3.5W per each QSFP28 port) |
|
| Operating System | Mellanox Onyx | |
| Mounting System | 1U 19” rackmount | |
| Environmental Tolerances | Temperature: 0-40°C (32°-104°F) Humidity: 10%-85% (non-condensing) Altitude: 0-10,000 ft (0-3050m) |
|
| Throughput | 3.2Tb/s | |
| Speed | 1/10/25/40/50/100GbE per port |
| System Connectivity - I/O | Connector Cage | 16x QSFP28 |
| Supported Modules and Cables | - QSFP28, SFP28 short and long range optics - QSFP28 to QSFP28 DAC cable - QSFP breakout cables 100GbE to 4x 25GbE DAC, optical |
| Bundled Accessories | Standard Bundle | Rack Mount Kit Quick Start Guide 2x IEC C13 to C14 Power Cables Mellanox 3-year support |
| Small Bundle | Connect up to 8 rx nodes to 2x vx 1, vx 2 or vx 4 Standard Bundle + 10x 25GbE Optical Transceiver 3x 100GbE Optical Transceiver 3x MTP to Quad LC OM4 break-out fibre cable (5m) |
|
| Medium Bundle | Connect up to 16 rx nodes to 4x vx 1, vx 2 or vx 4 Standard Bundle + 20x 25GbE Optical Transceiver 5x 100GbE Optical Transceiver 5x MTP to Quad LC OM4 break-out fibre cable (5m) |
|
| Small Bundle 100G | Connect up to 8 rx nodes to 2x vx 4+ or vx 4 with the 100GbE network upgrade Standard Bundle + 8x 25GbE Optical Transceiver 6x 100GbE Optical Transceiver 2x MTP to Quad LC OM4 break-out fibre cable (5m) 2x MTP to MTP OM4 fibre cable (5m) |
|
| Medium Bundle 100G | Connect up to 16 rx nodes to 4x vx 4+ or vx 4 with the 100GbE network upgrade Standard Bundle + 16x 25GbE Optical Transceiver 12x 100GbE Optical Transceiver 4x MTP to Quad LC OM4 break-out fibre cable (5m) 4x MTP to MTP OM4 fibre cable (5m) |